Cycling Bargains - Swinnerton Cycles Crank Brothers Pedal - Candy 3 - Black Colour Black (swinnerton-176975)

Cheapest | Lowest | Sale | Deal Price
Was £149.99, NOW £127.49 (15% OFF)

Available from Swinnerton Cycles.

Swinnerton Cycles Crank Brothers Pedal - Candy 3 - Black Colour Black

Product Description

The crankbrothers candy is an iconic pedal designed by Carl and Frank, the original founders of crankbrothers, they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated.It started with a simple question_ what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail, at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area. Cleat_ Premium brass cleats included Shims_ Included Release Angle_ 15 to 20 Warranty_ 5 years Weight_ 304g per pair Spindle_ Forged scm435 chromoly steel Body_ 2 piece machined aluminium Wings_ Cast Steel Spring_ 300 series stainless steel Inner bearing_ Needle Outer bearing_ Cartridge Maximum rider weight_ No restrictions Colour options_ Black/Silver, Blue/Silver or Red/Silver You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). These shims come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal). As with the rest of the crankbrothers range the pedals are fully serviceable with a level 3 / 11 service kit (product code CRB-11730). Servicing is simple and does not require any specialist tools, just a flat head screwdriver, socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.