Cycling Bargains - Leisure Lakes Bikes OneUp Components OneUp Dropper Post Remote V2 Black (33442095207)

ONLY £49.50

Available from Leisure Lakes Bikes.

Leisure Lakes Bikes OneUp Components OneUp Dropper Post Remote V2 Black

Product Description

The OneUp Dropper Post Remote V2 is an aluminium remote with an oversized bearing and a super smooth action, it's unique lever position allows you to keep a stronger grip on the bars while actuating your post. Don't think twice about dropping your post, even when charging into technical sections. The OneUp lever mimics your R/H shifter's inboard upshift paddle position instead of the usual downshift paddle position of most remotes. This position requires considerably less thumb movement to reach the lever.With no bleeding, the cable set-up is quick and easy. The cable clamps at the lever making shortening the housing length for clean routing a breeze. Unlike a hydraulically actuated dropper, there is no temperature sensitivity and if your remote gets damaged you can still lower or extend your post by removing it from your frame and pushing on the actuator by hand.OneUp Dropper Post Remote V2 FeaturesA better remote for any cable operated dropperNo bleedingQuick and easy to set-upKit includes cable and housingCompatible with all cable actuated dropper postsOneUp Dropper Remote V2 Install Instructions22.2mm ClampLoosely attach the hinged clamp to your handlebar (Left side of brake for SRAM, Right side of brake for Shimano)Attach the remote body to the clamp using your preferred mounting hole.Torque the remote body to the clamp using a 3mm hex to 3NmLoosen the 22.2mm clamp and rotate the OneUp dropper remote until the remote body is parallel to the brake leverSnug the 22.2mm clamp to 1Nm max.Shimano I-Spec II (M9000, M8000, M6000 etc)Remove the lever mounting bolt completely from the left brake using a 4mm hexDepress the "Push to Open" button using a 2mm hex to fully open the brake lever clampRemove the plastic spacer from the inside of the lever clampInstall the OneUp I-spec II adapter into the lever clampLoosely reinstall the brake lever clamp onto the handlebarAttach the remote body to the I-spec II adapter using your preferred mounting hole.Torque the remote body to the I-spec II adapter using a 3mm hex to 3NmRotate the OneUp dropper remote until the remote body is parallel to the brake lever.Torque the brake lever clamp to the manufacturer's recommendationShimano I-Spec EV (12 speed XTR M9100, XT M8100, SLX M7100 only)Remove the lever mounting bolt completely from the left brake using a 4mm hexDepress the "Push to Open" button using a 2mm hex to fully open the brake lever clampInstall the OneUp supplied T-nut into the curved recess on the hinged clampReinstall the brake lever clamp onto the handlebarInstall the OneUp supplied IS-EV adapter onto the T-nutAttach the remote body to the IS-EV adapter using your preferred mounting hole.Torque the remote body to the IS-EV adapter using a 4mm hex to 3NmRotate the OneUp dropper remote until the remote body is parallel to the brake lever.Torque the IS-EV adapter bolt to the brake clamp using a 4mm hex to 3Nm.SRAM Matchmaker XRemove Brake lever mounting screw and hinged clamp using a T25 TorxInstall the OneUp supplied T-nut into the curved recess on the hinged clampReinstall the brake lever clamp onto the handlebarInstall the OneUp supplied Matchmaker X adapter onto the T-nutAttach the remote body to the Matchmaker X adapter using your preferred mounting hole.Torque the remote body to the Matchmaker X adapter using a 3mm hex to 3NmRotate the OneUp dropper remote until the remote body is parallel to the brake lever.Torque the IS-EV adapter bolt to the brake clamp using a 4mm hex to 3Nm.